Quickly Solve Garage Door Issues Without Racking Your Brains

One of the most annoying things that you would not want to greet you one beautiful morning is to discover that you cannot open or shut your garage door using your reliable and trustworthy remote.

Having a garage door remote from Remote Pro to open and close your garage from a distance is one of the conveniences of modern day living. There are times, however, when such amenity develops some problems which can result in the doors being unable to open or shut properly.

Imagine if you have an urgent meeting and your car is still inside the garage. Being in this situation is definitely enough to drive you to the brink of insanity. So before this happens, you might want to know some common issues that cause this to happen and how to quickly solve them.

Weak Or Dead Batteries

Instead of jumping up and down in great frustration, you might want to check first if your remote battery still has some juice left. According to Household Tips Guide, in nine out of ten situations like this, the culprit is dead or weak batteries.

If your remote garage door opener is equipped with a wall switch, try using that to check if you can open or shut the door. If it does, then there is a high probability that you have dead batteries in your Merlin remotes. Obviously, the quickest and simplest fix, in this case, would be to replace the batteries, and everything will work fine again.

The Torsion Spring

Another likely cause of your garage is not opening or closing is the torsion springs. This nifty garage door implement stores mechanical energy and is responsible for keeping the door in balanced position. Because of the tremendous amount of mechanical energy it stores, torsion springs wear out after about or a little over 10,000 cycles.

If you see visible gaps in the spring, then perhaps it is time to call an expert on garage doors to see what can be done. According to an article posted on Top4.com, this is the most logical action you can do because tinkering with the torsion spring yourself can be dangerous.

Misaligned Tracks

This is also one of the issues that should be looked into in case your garage door will not properly open or shut. Garage doors with misaligned tracks often produce rubbing sound upon reaching a particular section of the track when you open or close it.

Another telltale sign that misaligned tracks are the problem is when doors would slow down when reaching the affected spot. You can fix the issue yourself by loosening the screws holding the track frame then tapping the track gently to move into position. When you are sure the tracks are properly aligned, tighten the screws again.

These are some of the most common issues that can cause your garage door not to open or shut. There are also a couple of garage door issues that can easily be fixed without breaking a sweat. You need not stress a lot about it because, at the end of the day, you can get it working again.